Removal (Left Cylinder Head)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect Heated Oxygen Sensor (HO2S) connector. Remove front exhaust pipe and gaskets. Disconnect and remove engine cooling fans. See Figure. Remove dipstick guide assembly. Remove engine hanger and exhaust manifold. Remove exhaust manifold stay and exhaust manifold gasket.