LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1995 >> Talon ESi, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (2.5L V6 Engine - VIN [N] - Avenger & SEBRING Coupe) >> Removal & Installation >> Cooling System Bleeding

Cooling System Bleeding

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slowly fill radiator and reserve tank. Install radiator cap. Start engine and allow it to reach normal operating temperature. Ensure thermostat is open by touching radiator hose and ensuring that warm water is flowing through it. After thermostat has opened, increase engine speed to 3000 RPM 3 times. Turn engine off and allow to cool.
  2. Check coolant level of radiator. If coolant level has dropped repeat previous step. If coolant level has not dropped, top off radiator and reserve tank.
scientia non olet · About LEMON Manuals