Valves & Valve Springs
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Intake Valves | ||||||
| Face Angle | 45-45 1/2° | |||||
| Head Thickness | ||||||
| Standard Value | .039" (1.0 mm) | |||||
| Limit | .019" (.50mm) | |||||
| Length | ||||||
| 1995-96 | (1) | |||||
| 1997 | ||||||
| Standard Value | 4.421" (112.30 mm) | |||||
| Limit | 4.402" (111.80 mm) | |||||
| Projection | ||||||
| 1995-96 | (1) | |||||
| 1997 | ||||||
| Standard Value | 1.941" (49.30 mm) | |||||
| Limit | 1.961" (49.80 mm) | |||||
| Stem Diameter | .236" (6.0 mm) | |||||
| Exhaust Valves | ||||||
| Face Angle | 45-45 1/2° | |||||
| Head Thickness | ||||||
| Standard Value | .047" (1.2 mm) | |||||
| Limit | .028" (.70 mm) | |||||
| Length | ||||||
| 1995-96 | (1) | |||||
| 1997 | ||||||
| Standard Value | 4.493" (114.11 mm) | |||||
| Limit | 4.473" (113.61 mm) | |||||
| Projection | ||||||
| 1995-96 | (1) | |||||
| 1997 | ||||||
| Standard Value | 1.941" (49.30 mm) | |||||
| Limit | 1.961" (49.80 mm) | |||||
| Stem Diameter | .236" (6.0 mm) | |||||
| Valve Springs | ||||||
| Free Length | ||||||
| Standard Value | 2.01" (51 mm) | |||||
| Limit | 1.97" (50 mm) | |||||
| Out-Of-Square | ||||||
| Standard Value | 2° Or Less | |||||
| Limit | 4° | |||||
| Lbs. @ In. (kg @ mm) | ||||||
| Pressure | ||||||
| Valve Closed | 60 @ 1.7402 (27 @ 44.2 mm) | |||||
|
||||||