Cylinder Head
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Grinding Limit | (1) .008" (.20 mm) | |||||
| Cylinder Head Height | 4.72-4.73" (119.9-120.1 mm) | |||||
| Warpage | ||||||
| Standard Value | .0012" (.03 mm) | |||||
| Limit | .008" (.20 mm) | |||||
| Valve Seats | ||||||
| Valve Contact Width | .035-.051" (.90-1.3 mm) | |||||
| Intake Valve | ||||||
| Seat Bore Diameter | ||||||
| 0.3 O.S. | 1.3504-1.3516" (34.30-34.33 mm) | |||||
| 0.6 O.S. | 1.3622-1.3634" (34.60-34.63 mm) | |||||
| Exhaust Valve | ||||||
| Seat Bore Diameter | ||||||
| 0.3 O.S. | 1.2520-1.2531" (31.80-31.83 mm) | |||||
| 0.6 O.S. | 1.2638-1.2650" (32.10-32.13 mm) | |||||
| Valve Guides | ||||||
| Intake Valve | ||||||
| Valve Guide Cylinder Head Bore I.D. | ||||||
| 0.05 O.S. | .4350-.4358" (11.05-11.07 mm) | |||||
| 0.25 O.S. | .4429-.4437" (11.25-11.27 mm) | |||||
| 0.50 O.S. | .4528-.4535" (11.50-11.52 mm) | |||||
| Valve Guide I.D. | .236" (6 mm) | |||||
| Valve Guide O.D. | .433" (11 mm) | |||||
| Valve Guide Installed Height | .551" (14 mm) | |||||
| Valve Stem-To-Guide Oil Clearance | ||||||
| Standard Value | .0008-.0020" (.02-.05 mm) | |||||
| Limit | .004" (.10 mm) | |||||
| Exhaust Valve | ||||||
| Valve Guide Cylinder Head Bore I.D. | ||||||
| 0.05 O.S. | .4350-.4358" (11.05-11.07 mm) | |||||
| 0.25 O.S. | .4429-.4437" (11.25-11.27 mm) | |||||
| 0.50 O.S. | .4528-.4535" (11.50-11.52 mm) | |||||
| Valve Guide I.D. | .236" (6 mm) | |||||
| Valve Guide O.D. | .433" (11 mm) | |||||
| Valve Guide Installed Height | .551" (14 mm) | |||||
| Valve Stem-To-Guide Oil Clearance | ||||||
| Standard Value | .0016-.0028" (.040-.070 mm) | |||||
| Limit | .006" (.15 mm) | |||||
|
||||||