LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1995 >> Talon ESi, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (2.5L V6 Engine - VIN [N] - Avenger & SEBRING Coupe) >> Engine Oiling >> Oil Pump >> Removal & Disassembly

Removal & Disassembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Dodge Avenger, 1997 Chrysler Sebring, 1996 Dodge Avenger, 1996 Chrysler Sebring, and 1995 Dodge Avenger. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Following procedure is with engine removed from vehicle, and timing belt and crankshaft sprocket removed from engine.
  1. Remove oil pan. See OIL PAN  under REMOVAL & INSTALLATION.
  2. Remove oil pick up tube and gasket. Remove pressure relief valve plug. Remove pressure relief valve spring and plunger. See Figure. Remove crankshaft front oil seal. Remove pump cover bolts and pump cover. Make alignment dots on outer and inner rotors for reassembly reference. Remove inner and outer rotors.
scientia non olet · About LEMON Manuals