Final Assembly
To install remaining components, reverse removal procedure. Ensure proper length bolts are installed in timing belt covers. See Fig 1. See Timing Cover Bolt Length & Torque table. Adjust drive belts to proper tension.
Timing Cover Bolt Length & Torque
| Application | INCH Lbs. (N.m) |
|---|---|
| "A" 6 x 16 mm Flange Bolt | 89-106 (10-12) |
| "B" 6 x 18 mm Flange Bolt | 89-106 (10-12) |
| "C" 6 x 25 mm Loose Washer Bolt | 58 (6.5) |
| "D" 6 x 25 mm Flange Bolt | 89-106 (10-12) |
| "E" 6 x 45 mm Flange Bolt | 89-106 (10-12) |