LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Talon ES, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc >> Removal & Installation >> Front Brake Caliper, Pads & Rotor >> Inspection

Front Brake Caliper, Pads & Rotor: Inspection

  1. Replace pads if thickness is less than .08" (2 mm). Measure rotor thickness in 4 or more locations. Replace rotor and pads if rotor thickness is less than .882" (22.40 mm).
  2. To measure rotor runout, tighten rotor to hub with wheel lug nuts. Measure rotor runout at approximately .2" (5 mm) from outer circumference of rotor. If runout is equal to or exceeds .003" (.08 mm), change phase of rotor and hub (remove rotor and install with studs in different rotor holes). Remeasure runout. If changing phase of rotor and hub does not eliminate runout, replace rotor.
scientia non olet · About LEMON Manuals