LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1994 >> Summit LX, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear (AWD & Fwd) >> Removal & Installation >> Wheel Bearing >> Removal (Disc Brakes - AWD)

Removal (Disc Brakes - AWD)

  1. Raise and support vehicle. Remove wheel assembly. Remove speed sensor (if equipped). Remove brake caliper assembly and brake disc. Separate companion flange from axle shaft. Remove companion flange nut and washer.
  2. Remove companion flange and axle shaft assembly. Remove rear speed sensor rotor (if equipped). Remove outer bearing and dust cover from axle shaft. Remove inner bearing and oil seal using Driver (MB990938-01 ) and Adapter (MB990928-01 ).
scientia non olet · About LEMON Manuals