Cylinder Block Specifications

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore (1.5L)

Standard Diameter

2.9724-2.9736 (75.500-75.530)

Maximum Taper

.0008 (.020)

Maximum Out-Of-Round

.0008 (.020)

Minimum Deck Height

⁽¹⁾ 10.067 (255.70)

Maximum Deck Warpage

⁽¹⁾ .002 (.05)

Cylinder Bore (1.8L)

Standard Diameter

3.1734 (80.600)

Maximum Taper

.0004 (.010)

Maximum Out-Of-Round

.0004 (.010)

Deck Height

11.228 (285.20)

Maximum Deck Warpage

⁽¹⁾ .0039 (.099)

⁽¹⁾	If deck warpage exceeds specification, machine deck surface. DO NOT remove more than a combined total of .008" (.20 mm) material from original surfaces of cylinder head and cylinder block.