LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Talon ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [E] & 2.0L 4-CYL Turbo - VIN [F] >> Removal & Installation >> Water Pump >> Removal

Water Pump: Removal

  1. Remove cover located below engine. Drain cooling system. Remove both timing belts and front crankshaft sprocket. See TIMING BELTS  .
  2. Remove alternator brace. Remove water pump bolts. Note bolt length and location. Remove water pump and gasket. Remove "O" ring from coolant inlet pipe.
CAUTION: Install longest water pump bolt at alternator brace position.