LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Talon ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [E] & 2.0L 4-CYL Turbo - VIN [F] >> Removal & Installation >> Silent Shafts & Bearings >> Removal

Silent Shafts & Bearings: Removal

  1. Remove front cover and oil pump. See OIL PUMP & FRONT COVER  under ENGINE OILING. Remove silent shafts from cylinder block. See Fig 1 . Inspect silent shaft bearings for damage and improper oil clearance.
    NOTE: Remove right front bearing first to allow tool access to rear bearing.
  2. If bearings require replacement, use Bearing Remover (MD998371) for front bearing, Bearing Remover (MD998372) for right rear bearing and Bearing Remover (MD998372) and Guide Plate (MD998374) for left rear bearing. See Fig 2 .
Fig 1: Exploded View Of Silent Shafts & Components
G90C02627Courtesy of CHRYSLER CORP.
Fig 2: Removing Silent Shaft Bearings
G90E02628Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals