Cylinder Block Specifications
CYLINDER BLOCK
| Application | In. (mm) | |||
|---|---|---|---|---|
| Cylinder Bore | ||||
| Standard Diameter | 3.3465 (85.000) | |||
| Maximum Out-Of-Round & Taper | .0004 (.010) | |||
| Deck Height (New Cylinder Block) | 11.18 (283.9) | |||
| Maximum Deck Warpage | (1) .004 (.10) | |||
|
||||
| Application | In. (mm) | |||
|---|---|---|---|---|
| Cylinder Bore | ||||
| Standard Diameter | 3.3465 (85.000) | |||
| Maximum Out-Of-Round & Taper | .0004 (.010) | |||
| Deck Height (New Cylinder Block) | 11.18 (283.9) | |||
| Maximum Deck Warpage | (1) .004 (.10) | |||
|
||||