Float Height Measurement
Remove fuel gauge sending unit from fuel tank. Move float to highest point and measure height between point "F" and sending unit cover flange. See Figure . Move float to lowest point and measure height between point "E" and sending unit cover flange. Refer to FLOAT HEIGHT SPECIFICATIONS . Replace sending unit if readings are not correct.
FLOAT HEIGHT SPECIFICATIONS
| Measure Point | Height | |
|---|---|---|
| FWD | ||
| "F" | 1.69-1.89" (43.1-48.1 mm) | |
| "E" | 6.9-7.06" (175.5-179.5 mm) | |
| AWD | ||
| "F" | .84-.96" (21.3-24.3 mm) | |
| "E" | 7.84-7.96" (199.2-202.2 mm) | |