LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit ES, 4D Sedan, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutches) >> Removal & Installation >> Clutch Release Cylinder >> Removal & Installation (Hydraulic Clutch)

Removal & Installation (Hydraulic Clutch)

WARNING: This page is about a different variant/trim than selected.
  1. Remove and plug hydraulic line at release cylinder. Remove clip and clevis pin attaching push rod to clutch release arm (if equipped). Remove cylinder-to-transaxle bolts and remove clutch release cylinder.
  2. To install, reverse removal procedure. Apply grease to clevis pin or push rod-to-release shaft contact area. Bleed clutch system.
scientia non olet · About LEMON Manuals