LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit ES, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.8L 4-CYL - VIN [C] >> Torque Specifications >> Torque Specifications (1.8L)

Torque Specifications (1.8L)

TORQUE SPECIFICATIONS (1.8L) (1)

Application Ft. Lbs. (N.m)
A/C Tensioner Pulley Bracket Bolt 17-20 (23-27)
Air Intake Plenum Bolt 11-14 (15-19)
Camshaft Bearing Cap Bolt
6 x 20-mm 14-15 (19-20)
8 x 65-mm 15-20 (20-27)
Camshaft Sprocket Bolt 58-72 (79-98)
Connecting Rod Nut (2)
Crankshaft Pulley Bolt 11-13 (15-18)
Crankshaft Sprocket Bolt 80-94 (109-127)
Cylinder Head Bolt (Cold Engine) (3)
Step 1 55 (75)
Step 2 Fully Loosen
Step 3 14.5 (20)
Step 4 1/4 turn (90 degrees)
Step 5 1/4 turn (90 degrees)
Damper Pulley Bolt 11-13 (15-18)
Engine Support Bracket Bolt 36-47 (49-64)
Exhaust Manifold Nut 11-14 (15-19)
Flywheel/Drive Plate Bolt 94-101 (127-137)
Front Cover Bolt 11-13 (15-18)
Intake Manifold Bolt 13 (18)
Intake Manifold Brace Bolt 22 (31)
Main Bearing Cap Bolt (4)
Oil Filter Bracket Bolt 11-16 (15-22)
Oil Pick-Up Tube Nut 13-18 (18-24)
Oil Pump Cover Bolt 11-13 (15-18)
Oil Pump Sprocket Nut 26-29 (35-39)
Power Steering Pump Bolts 26-33 (35-45)
Oxygen Sensor 29-36 (39-49)
Rocker Arm Assembly Bolts 14-15 (19-20)
Silent Shaft Sprocket Bolt 25-29 (34-39)
Throttle Body Bolt 11-16 (15-22)
Timing Belt "A" Tensioner Bolt 16-22 (22-30)
Timing Belt "B" Tensioner Bolt 11-16 (15-22)
Water Pump Bolt
Except 8 x 65-mm 10 (14)
8 x 65-mm 15-19 (20-26)
INCH Lbs. (N.m) 
Fuel Rail Bolt 84-108 (9-12)
Oil Pan Bolt/Nut 48-60 (5-7)
Timing Belt Cover Bolt 84-108 (9-12)
Valve Cover Bolt 48-60 (5-7)
Water Pump Pulley Bolt 72-84 (8-9)
(1) Torque specifications have been updated by Mitsubishi TSB. See TECHNICAL SERVICE BULLETIN TSB-92-11-003 .
(2) First tighten to 15 ft. lbs. (20 N.m), then tighten nut an additional 1/4 turn.
(3) Tighten bolts to specification in sequence. See Figure.
(4) First tighten to 18 ft. lbs. (25 N.m), then tighten nut an additional 1/4 turn.