LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit ES, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.8L 4-CYL - VIN [C] >> Removal & Installation >> Cylinder Head >> Installation (1.8L)

Installation (1.8L)

  1. Install cylinder head using new gasket. Ensure identification mark at timing belt end of gasket faces upward. DO NOT apply sealant to head gasket. Install and tighten cylinder head bolts (in 5 steps) to specification in proper sequence. See Figure.
  2. To complete installation, reverse removal procedure. Apply sealant to contact surfaces of semi-circular packing. Apply gasoline to "O" ring on fuel line before installing fuel line in fuel delivery pipe. Adjust all control cables. Fill cooling system.
scientia non olet · About LEMON Manuals