LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit ES, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [A] & 1.8L 4-CYL - VIN [C] >> Removal & Installation >> Cylinder Head >> Installation (1.5L)

Installation (1.5L)

  1. Install cylinder head gasket with identification mark toward timing belt, facing up. See Fig 1. Install cylinder head. DO NOT apply sealant to head gasket. Tighten bolts to specification in sequence, in 2 stages. See Figure. See appropriate table in TORQUE SPECIFICATIONS .
  2. Install timing belt and camshaft sprocket in original location. Ensure timing marks are aligned. See TIMING BELT. To complete installation, reverse removal procedure. Refill cooling system. Adjust all control cables.
Fig 1: Locating Cylinder Head Gasket Identification Mark (1.5L)
G90D08781Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals