LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit ES, 4D Sedan, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing >> Temperature Gauge >> Sensor Resistance Test

Sensor Resistance Test

  1. Remove Coolant Temperature Sensor (CTS) from engine. Coolant sensor is located on intake manifold. Place sending unit in 158°F (70°C) water. Check sensor resistance using ohmmeter.
  2. CTS resistance should be 90-117 ohms. If CTS resistance is okay, go to GAUGE RESISTANCE TEST  . Replace CTS if resistance is not as specified.
scientia non olet · About LEMON Manuals