Resistance Test
- Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION.
- Measure resistance between appropriate terminals of instrument cluster. See Fig 1 and Fig 2 . See FUEL GAUGE RESISTANCE SPECIFICATIONS . If resistance readings are not to specification, replace fuel gauge.
FUEL GAUGE RESISTANCE SPECIFICATIONS
| Application | Terminals | Ohms |
|---|---|---|
| With Tachometer | "A" & "B" | 210.6-257.4 |
| "A" & "C" | 78.3-95.7 | |
| "B" & "C" | 132.3-161.7 | |
| Without Tachometer | "A" & "B" | 218.7-267.3 |
| "A" & "C" | 74.7-91.3 | |
| "B" & "C" | 144.0-176.0 | |