LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Summit ES, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [A,J,X] & 1.6L 4-CYL - VIN [Y] >> Removal & Installation >> Cylinder Head >> Removal (Precis)

Removal (Precis)

  1. Release fuel pressure. See FUEL PRESSURE RELEASE . Remove air cleaner. Drain coolant. Remove upper radiator hose. Remove distributor and spark plug wires. Remove intake and exhaust manifolds. See INTAKE MANIFOLD  and EXHAUST MANIFOLD  .
  2. Remove fan, spacer, water pump pulley, and upper timing belt cover. Align timing marks. Loosen timing belt tensioner. Move belt tensioner toward water pump. Temporarily tighten tensioner bolt.
    CAUTION: Ensure timing belt does not come off of crankshaft sprocket. DO NOT rotate engine with timing belt disengaged from camshaft. See TIMING BELT .
  3. Mark location of timing belt on camshaft sprocket for installation reference. Remove timing belt from camshaft sprocket.
  4. Remove rocker cover. Using Wrench (09221-11000), loosen head bolts in proper sequence. See Figure. Remove cylinder head.
scientia non olet · About LEMON Manuals