LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Summit ES, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [A,J,X] & 1.6L 4-CYL - VIN [Y] >> Lubrication >> Oil Pump & Front Cover >> Reassembly & Installation (1.6L)

Reassembly & Installation (1.6L)

  1. Ensure timing marks are aligned on gears. Install gear cover. Use Seal Installer (MD998375) to install seal in front cover. Coat outer surface of Seal Guide (MD998285) with oil, and install over end of crankshaft.
  2. Install front cover with new gasket. Install oil filter bracket. Install proper length front cover bolts in appropriate locations. See Fig 1. Tighten to specification. See TORQUE SPECIFICATIONS .
  3. Using plug cap wrench, install plug cap. Tighten to specification. To complete installation, reverse removal procedure.
Fig 1: Installing Front Cover Bolts (1.6L)
G90J08802Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals