LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1992 >> Summit ES, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VINS [A,J,X] & 1.6L 4-CYL - VIN [Y] >> Lubrication >> Oil Pump & Front Cover >> Reassembly & Installation (1.5L)

Reassembly & Installation (1.5L)

  1. Lubricate all components with engine oil. Assemble all components into housing in original locations.
  2. Install front cover with new gasket. Install front cover bolts in appropriate locations. See Fig 1. Tighten to specifications. See TORQUE SPECIFICATIONS . Coat outer surface of Seal Guide (MD998285 for Precis and MD998305 for all other models). Install seal guide over end of crankshaft.
  3. Slide seal into front cover. Using Seal Installer (MD998375 for Precis and MD998304 for all others), install front seal in front cover. To complete installation, reverse removal procedure.
Fig 1: Installing Front Cover Bolts (1.5L)
G90H08801Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals