Entering Self-Diagnostics

To enter the trip computer self-diagnostic mode, turn ignition switch to the RUN position while depressing the TRIP/TIME and RESET switches simultaneously.

• Depressing the TRIP/TIME switch initiates Test 2 when the ENGLISH/METRIC switch is in the ENGLISH position.
• Depressing the TRIP/TIME switch initiates Test 3 when the ENGLISH/METRIC switch is in the METRIC position.
• Depressing the FUEL/TEMP switch initiates Test 4 when the ENGLISH/METRIC switch is in the ENGLISH position.
• Depressing the FUEL/TEMP switch initiates Test 5 when the ENGLISH/METRIC switch is in the METRIC position.