LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1990 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [R] & 2.0L Turbo 4-CYL - VIN [U] >> Removal & Installation >> Oil Pan - 2WD >> Installation

Oil Pan - 2WD: Installation

To install, reverse removal procedure. Apply a .16" (4.1 mm) diameter bead of Sealant (MZ100168) on oil pan sealing surface. Ensure sealant is on inside of bolt hole and centered in groove on oil pan flange. See TORQUE SPECIFICATIONS  .

NOTE: Rest engine on engine mount before tightening crossmember mount through bolt.
scientia non olet · About LEMON Manuals