LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1990 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [R] & 2.0L Turbo 4-CYL - VIN [U] >> Removal & Installation >> Exhaust Manifold - Non-Turbo >> Removal

Exhaust Manifold - Non-Turbo: Removal

  1. Disconnect negative battery cable. On A/C equipped models, remove condenser fan motor assembly. Disconnect oxygen sensor connector. Install Oxygen Sensor Remover/Installer (MD998703) over oxygen sensor. Place wrench on oxygen sensor remover/installer and remove oxygen sensor from manifold.
  2. Disconnect exhaust pipe from exhaust manifold flange. Remove exhaust manifold cover and brackets from exhaust manifold. Remove exhaust manifold bolts/nuts, exhaust manifold and gasket.
scientia non olet · About LEMON Manuals