Colt, Colt Wagon 4WD, Colt 200 & Summit: Inspection
- Check for bent or damaged stabilizer bar. Inspect all bushings for wear and deterioration. Check stabilizer link ball joint dust cover for cracks. Check bolts for damage or wear. Replace damaged parts as necessary.
- Check stabilizer link ball joint(s) starting torque. See BALL JOINT CHECKING near the beginning of this article. Replace stabilizer link if ball joint starting torque exceeds 14.8-27.8 INCH lbs. (1.7-3.1 N.m).
NOTE:
Replace self-locking nuts (if used). Tighten stabilizer bar bolts to specification with vehicle at normal operating height.