LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1990 >> Summit DL, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Testing >> Front Disc Brake Rotor >> Installation (4WD Ram-50)

Installation (4WD Ram-50)

  1. To install, reverse removal procedure. Using dial indicator, check drive axle end play. Adjust end play if not within .008-.020" (.20-.50 mm). Rotate drive axle forward and rearward until maximum end play is obtained.
  2. If adjusting axle shaft end play, use proper shim to obtain desired end play. Shim is located behind snap ring on end of drive axle. Install shim and recheck axle end play.
Fig 1: Exploded View of Front Brake Assembly (4WD Ram-50)
G100240Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.