Colt Vista 2WD, Colt Wagon & Ram-50
Park vehicle on level surface. Remove all luggage and passengers. Ensure lever is not against stopper bolt. Check spring length. If spring length is not within specification, adjust cable or support until correct length is obtained. See Fig 1. Refer to the LOAD-SENSING SPRING LENGTH table.
LOAD-SENSING SPRING LENGTH
| Application | In. (mm) |
|---|---|
| Colt Vista 2WD | 3.42-3.54 (87-90) |
| Colt Wagon | 3.50-3.59 (89-91) |
| Ram-50 | 6.85-6.93 (174-176) |