LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1989 >> Summit DL, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [X] & 1.6L 4-CYL - VIN [Y] >> Removal & Installation >> Rocker Arm Shaft Assembly >> Reassembly & Installation (1.5L)

Reassembly & Installation (1.5L)

  1. Install components in original location. Rocker arms are marked "1-3" for odd cylinders and "2-4" for even cylinders. See Fig 1. Install short springs on exhaust shaft and long springs on intake shaft.
  2. Install rocker arms in proper location. See Fig 1. To install remaining components, reverse removal procedure. Tighten rocker arm assembly retaining bolts to specification. Adjust valve clearance. See VALVE CLEARANCE ADJUSTMENT .
Fig 1: Typical 1.5L Rocker Arm & Component Installation
G90J08859Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals