LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1989 >> Summit DL, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.5L 4-CYL - VIN [X] & 1.6L 4-CYL - VIN [Y] >> Removal & Installation >> Camshaft >> Inspection (1.5L)

Inspection (1.5L)

  1. Inspect camshaft journal diameter, lobe lift and signs of wear. Replace camshaft if not within specification. See ENGINE SPECIFICATIONS tables at end of article.
  2. Install camshaft thrust case, thrust plate and bolt on camshaft. Tighten bolt. Using feeler gauge, measure clearance between thrust case and the camshaft. This is the end play. Replace thrust case and recheck clearance if not within specification. See ENGINE SPECIFICATIONS tables at end of article. If still not within specification, replace camshaft.
scientia non olet · About LEMON Manuals