LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2024 >> ProMaster 2500 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Electric Vehicle Control Unit Module (EVCU) - DTCS P2184-00 To P2534-00) >> DTC Troubleshooting >> P2299-00 Brake Pedal Position/Accelerator Pedal Position Incompatible >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
CUSTOMER PRESSING ACCELERATOR PEDAL AND BRAKE PEDAL, AND HOLDING THEM DOWN SIMULTANEOUSLY
BRAKE PEDAL OUT OF CALIBRATION
ACCELERATOR PEDAL POSITION (APP) SENSOR
BRAKE SYSTEM CONTROL (BSCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .