LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2024 >> ProMaster 2500 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Electric Vehicle Control Unit Module (EVCU) - DTCS P1628-00 To P1C8F-00) >> DTC Troubleshooting >> P167B-00 Controlled System Shutdown >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE CONDITION 

WARNING:

On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury.

Read the HIGH-VOLTAGE SAFETY PROCEDURES. Refer to  HIGH VOLTAGE SAFETY PROCEDURES  . 

When the HIGH-VOLTAGE POWER-DOWN PROCEDURE is necessary. Refer to  VEHICLE HIGH VOLTAGE POWER DOWN  . 

  1. Repair all damage to the vehicle from the impact event.

    Has all the vehicle impact damage been repaired?

    Yes