LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2024 >> ProMaster 2500 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Brake System Control Module (BSCM) - DTCS U1106-00 To U35B9-00) >> DTC Troubleshooting >> U1431-00 Implausible Acc Torque Message Received >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC 

NOTE:

For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem. 

  1. Start the engine and allow it to reach operating temperature.
    WARNING:

    When the engine is operating, do not stand in direct line with the fan. Do not put your hands near the pulleys, belts, or fan. Do not wear loose clothing. Failure to follow these instructions can result in possible serious or fatal injury.

  2. With a scan tool, select View DTCs.

    Is the status active or pending for this DTC?

    Yes 

    No