LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2024 >> ProMaster 2500 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Brake System Control Module (BSCM) - DTCS C2112-00 To U0140-00) >> DTC Troubleshooting >> P2535-00 Ignition Switch On/Start Position Circuit High >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.

The Keyless Ignition Switch sends a LIN bus signal to the Radio Frequency (RF) Hub. The RF Hub sends a Controller Area Network (CAN) message to the Body Control Module (BCM) which in turn activates the Run/Start relay that provides a 12 volt signal to the Anti-lock Brake System (ABS) Module.