LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2024 >> ProMaster 2500 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Brake System Control Module (BSCM) - DTCS C0021-00 To C0595-00) >> DTC Troubleshooting >> C051D-00 Multi-Axis Acceleration Sensor Module "A" Missing Calibration >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2024 RAM ProMaster EV. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER (ORC) DTCS
OCCUPANT RESTRAINT CONTROLLER (ORC) IMPROPERLY INSTALLED/LOOSE OR WIRING HARNESS DAMAGE
ABS INITIALIZATION ROUTINE NOT PERFORMED
OCCUPANT RESTRAINT CONTROLLER (ORC)
BRAKE SYSTEM CONTROL MODULE (BSCM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .