Switch Pod

REMOVAL 

1. Remove the instrument panel trim panel. Refer to PANEL, INSTRUMENT PANEL TRIM, REMOVAL AND INSTALLATION .
2. Working on the backside of the instrument panel trim panel, remove the fasteners on the switch pod and remove it from the instrument panel trim panel.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Instrument Panel Trim Panel

   2 - Switch Pod

   3 - Fasteners

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• Tighten the fasteners securely.