Cable, Shift: Adjustments: Adjustment
- Park the vehicle on level ground and set the parking brake.
- Place the gearshift lever in gated Park (P) and remove ignition key.
1 - Shift Cable Lock Collar 2 - Shift Cable Adjuster Lock 3 - Shift Cable End - Release the cable adjustment adjuster lock on the shifter cable by pulling up on the cross-lock.
- Pull the manual lever fully forward to the park detent position.
- Release the park brake, then rock the vehicle to assure it is in park. Reset the park brake.
- Lock the cable adjustment by pushing the cross-lock down, the cable should now be properly adjusted.
- Verify adjustment by using the verification procedure.