LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System >> Engine >> Bottle, Pressurized Coolant >> Removal

Bottle, Pressurized Coolant: Removal

  1. Partially drain the cooling system. Refer to DRAINING  .
    GC0157472Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the coolant return hose (1).
  3. Disconnect the coolant hose from the top of the pressurized coolant bottle.
  4. Remove the pressurized coolant bottle bolt (6) and lift upwards on the pressurized coolant bottle (3).
  5. Loosen the clamp (5) and disconnect the lower coolant hose (4).
scientia non olet · About LEMON Manuals