948TE/9HP48 - DTCS P2803-00 To U1932-00

• DTC Troubleshooting
  • P2803-00-Transmission Range Sensor "B" Circuit High
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • P2879-00-Clutch 2 Performance Stuck Disengaged
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0001-00-Can C Bus
  • U0100-00-Lost Communication With ECM/Pcm
  • U0102-00-Lost Communication With Transfer Case Control Module / AWD
  • U0103-00-Lost Communication With Electric Gear Shift Module
  • U0104-00-Lost Communication With Cruise Control Module
  • U0121-00-Lost Communication With Anti-Lock Brake System (Abs) Control Module
  • U0128-00-Lost Communication With Park Brake Control Module
  • U0131-00-Lost Communication With Electric Power Steering Control Module
  • U0140-00-Lost Communication With Body Control Module
  • U0151-00-Lost Communication With Occupant Restraint Controller (Orc)
  • U0155-00-Lost Communication With Cluster/CCN
  • U0212-00-Lost Communication With Steering Column Control Module
  • U0401-00-Implausible Data Received From ECM/Pcm
  • U0403-00-Implausible Data Received From TCASE
  • U0404-00-Implausible Data Received From ESM
  • U0405-00-Invalid Data Received From Cruise Control Module
  • U0415-00-Implausible Data Received From Abs
  • U0417-00-Invalid Data Received From Park Brake Control Module
  • U0420-00-Invalid Data Received From Power Steering Control Module
  • U0422-00-Implausible Data Received From Body Control Module
  • U0423-00-Implausible Data Received From Cluster/CCN
  • U0429-00-Implausible Data Received From SCM
  • U0452-00-Implausible Data Received From Restraints Control Module
  • U11E3-00-TCM Lost Communication With ESM On Dpt Can
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U11E4-00-Can Communication Messages Missing
  • U1267-00-No Valid Data Available From ESM On Canc Or Can Dpt
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U1400-00-Implausible TPS Signal Received
  • U1401-00-Implausible Engine Speed Signal Received
  • U1408-00-Implausible Brake Signal Received
  • U1412-00-Implausible Vehicle Speed Signal Received
  • U1424-00-Implausible Engine Torque Signal Received
  • U1428-00-Inaccurate Engine Torque Received
  • U1461-00-Implausible Data Received From ESM On Dpt
  • U1465-00-Implausible Driver Shift Request Signal Received
  • U1467-00 - Implausible Driver Shift Request Signal Received On Can And D-Pt Can
  • U1477-00-Implausible Paddle Shifter Data Received
  • U1932-00 - Operational Mode Status From BCM Missing