LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Link, Stabilizer Bar >> Removal

Link, Stabilizer Bar: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0204022Courtesy of CHRYSLER GROUP, LLC
  2. Remove the stabilizer bar link to lower control arm nut (2).
    GC0203890Courtesy of CHRYSLER GROUP, LLC
  3. Remove the lower washer (2) and bushing (1).
    GC0204022Courtesy of CHRYSLER GROUP, LLC
  4. Remove the stabilizer bar link to stabilizer bar nut (1).
  5. Remove the stabilizer link (3).
  6. Remove the upper bushing and washer.
scientia non olet · About LEMON Manuals