Link, Stabilizer Bar: Installation

Install one upper washer and one upper bushing to the stabilizer bar link.

Courtesy of CHRYSLER GROUP, LLC
Position the stabilizer link (3) to the lower control arm and to the stabilizer bar.

Courtesy of CHRYSLER GROUP, LLC
Install the lower bushing (1) and the lower washer (2).

Courtesy of CHRYSLER GROUP, LLC
Install the stabilizer bar link to lower control arm nut (2) and tighten to the proper torque specification. Refer to TORQUE SPECIFICATIONS .
Install the stabilizer bar link to stabilizer bar nut (1), do not tighten at this time.
Remove the support and lower the vehicle.
Tighten the stabilizer bar link to stabilizer bar nut (1) to the proper torque specification. Refer to TORQUE SPECIFICATIONS .