LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Link, Stabilizer Bar >> Installation

Link, Stabilizer Bar: Installation

GC0160211Courtesy of CHRYSLER GROUP, LLC
  1. Attach the stabilizer link (2) to stabilizer bar using NEW  nut (1). Tighten the nut to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  2. Attach the stabilizer link to the axle using a NEW  nut (3). Tighten the nut to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
  3. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals