LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Steering >> Steering Linkage >> Steering System >> Column >> Shroud, Steering Column, Lower >> Removal

Shroud, Steering Column, Lower: Removal

  1. Position the column tilt at the full-upward position.
  2. Remove the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .
    GC0160328Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four screws (1), then disengage the upper and lower shrouds from one another by applying hand pressure along the seams where the shrouds connect on the sides.
    GC0204025Courtesy of CHRYSLER GROUP, LLC
  4. Lower the shroud slightly and disconnect the Keyless Ignition Node (KIN) wire harness connector (1).
  5. Remove the KIN screws (2) and separate the KIN from the shroud.
scientia non olet · About LEMON Manuals