Possible Causes
| Possible Causes |
|---|
| EVAP PURGE CONTROL CIRCUIT SHORTED TO VOLTAGE |
| EVAP PURGE CONTROL CIRCUIT SHORTED TO GROUND |
| EVAP PURGE CONTROL CIRCUIT OPEN/HIGH RESISTANCE |
| EVAP PURGE SOLENOID RETURN CIRCUIT OPEN/HIGH RESISTANCE |
| EVAP PURGE SOLENOID |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .