LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Lubrication >> Sensor, Oil Pressure >> Removal

Sensor, Oil Pressure: Removal

  1. Perform the fuel system pressure release procedure. Refer to QUICK-CONNECT FITTINGS .
  2. Remove the lower intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL .
    GC0173574Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the oil pressure sensor wire harness connector (1).
    GC0173640Courtesy of CHRYSLER GROUP, LLC
  4. Remove the oil pressure sensor (1) from the oil filter housing.
scientia non olet · About LEMON Manuals