LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal

Insulator, Engine Mount, Rear: Removal

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0203996Courtesy of CHRYSLER GROUP, LLC
  3. Remove the rear transmission strut isolator to rear transmission mount bracket M16 bolt (1) and nut.
  4. Remove the rear transmission strut isolator to crossmember M16 bolt (3).
  5. Roll the engine/transmission forward and remove the rear transmission strut isolator.
  6. The following steps are only necessary for servicing the engine mount bracket.
    GC0204059Courtesy of CHRYSLER GROUP, LLC
  7. If necessary, remove the rear transmission mount bracket to transmission bolts (1).
    GC0203905Courtesy of CHRYSLER GROUP, LLC
  8. If necessary, remove the rear transmission strut isolator to rear transmission mount bracket M16 bolt/nut (1).
  9. If necessary, remove the rear transmission mount bracket bolt (3) and the rear transmission mount bracket (2).
scientia non olet · About LEMON Manuals