LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Engine Block >> Damper, Vibration >> Removal

Damper, Vibration: Removal

GC0144221Courtesy of CHRYSLER GROUP, LLC
  1. Remove the accessory drive belt from the crankshaft pulley only. Refer to BELT, SERPENTINE, REMOVAL .
    NOTE:

    A force greater than 350 N. m (260 ft. lbs.) may be required to remove the crankshaft vibration damper bolt.

  2. Hold the crankshaft vibration damper (1) with Vibration Damper Holder (2) and remove the crankshaft vibration damper bolt.

    (Special tool #10198, Holder, Vibration Damper)

  3. Pull the crankshaft vibration damper (1) from the crankshaft.
scientia non olet · About LEMON Manuals