LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Valves, Intake And Exhaust >> Removal

Valves, Intake And Exhaust: Removal

  1. Remove the cylinder head(s). Refer to CYLINDER HEAD, REMOVAL .
    NOTE:

    If the springs are to be reused, identify their positions so that they can be reassembled into their original locations.

  2. Remove the valve spring(s). Refer to SPRING(S), VALVE, REMOVAL .
    GC0144259Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    Before removing the valves, remove any burrs from the valve stem retainer lock grooves (2) and stem tip (1) to prevent damage to the valve guides.

  3. Remove the valve(s) (3). Identify each valve to be certain that each is installed in the original location.
  4. If required, remove the valve guide seal and spring seat. Refer to SEAL(S), VALVE GUIDE, REMOVAL .
scientia non olet · About LEMON Manuals