LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Spring(S), Valve >> Removal >> Off Vehicle

Off Vehicle

GC0144220Courtesy of CHRYSLER GROUP, LLC
  1. Remove the cylinder head(s). Refer to CYLINDER HEAD, REMOVAL .
  2. Position the Valve Spring Compressor Adapter (2) in the Valve Spring Compressor (1).

    (Special tool #10224, Adapter, Valve Spring) and (Special tool #C-3422-D, Compressor, Valve Spring)

    GC0144219Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Number 3 cylinder intake valve spring compression shown, all other valves similar.

  3. Compress the valve spring (3) and remove the valve retaining locks (4).
    GC0144252Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    If the springs are to be reused, identify their positions so that they can be reassembled into their original locations. Number 5 cylinder exhaust valve spring shown, all other valve springs similar.

  4. Release the valve spring compressor and remove the valve spring retainer (1) and valve spring (2).
    GC0144257Courtesy of CHRYSLER GROUP, LLC
  5. Remove the spring seat (1).
scientia non olet · About LEMON Manuals