LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Cylinder Head >> Solenoid, Variable Valve Lift >> Removal >> Bank 2 Solenoid 2

Bank 2 Solenoid 2

  1. Remove the upper intake manifold. Refer to MANIFOLD, INTAKE, REMOVAL .
    GC0173761Courtesy of CHRYSLER GROUP, LLC
  2. Position the rear engine wire harness (1) aside.
    GC0173713Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connector (1) from the Variable Valve Lift (VVL) solenoid.
  4. Remove the VVL solenoid retaining bolt (2).
  5. Remove the VVL solenoid from the cylinder head.
  6. The O-ring seal can be reused if not damaged.
scientia non olet · About LEMON Manuals